44951501TH Rev.2
7-8
Oki Data CONFIDENTIAL
7. TROUBLESHOOTING
Panel display ( identi-
fies that no display is
provided)
On-
line
lamp
Atten-
tion
lamp
Detail Solution
ORDER FUSER
Varies On
(Off)
Indicates the fuser is near the end of
its life. With ADMIN MENU-CONFIG
MENU-NEARLIFE LED set to DISABLE,
the attention LED is not lighting.
−
ORDER BELT
Varies On
(Off)
Indicates the transfer belt is near the
end of its life. This display is a warning
and the printer does not stop printing.
With ADMIN MENU-CONFIG MENU-
NEARLIFE LED set to DISABLE, the
attention LED is not lighting.
−
FUSER LIFE
Varies On Indicates the fuser is at the end of its
life (a warning). This display is only
a warning (not a life error). By cover
opening and closing after the printer has
a fuser life error, this status is displayed.
Replace the
fuser to a new
one.
BELT LIFE
Varies On Indicates the transfer belt is at the end
of its life (a warning). This display is only
a warning (not a life error). By cover
opening and closing after the printer
has a transfer belt life error, this status
is displayed.
Replace the
belt unit to a
new one.
%COLOR% TONER
EMPTY
Varies On Indicates the printer ran out of toner.
When temporally recovered by cover
opening and closing during a toner-
empty error, the printer develops this
status (warning).
%COLOR%
Y
M
C
K
Replace the
cartridge of the
toner to a new
one.
Panel display ( identi-
fies that no display is
provided)
On-
line
lamp
Atten-
tion
lamp
Detail Solution
%COLOR% REPLACE
TONER
Varies On Indicates the printer ran out of toner.
Having no print data, the printer
develops this status. The printer can
print monochrome data with issuing this
warning, and changes the display to an
Empty error for color data to print.
%COLOR%
Y
M
C
K
Replace the
cartridge of the
toner to a new
one.
%COLOR% TONER
NOT INSTALLED
Varies On Indicates the toner cartridge is not
installed. This status is only a warning.
%COLOR%
Y
M
C
K
Install the
toner cartridge
properly. Note
the cartridge
shipped,
installed in the
printer cannot
be used after
a supply toner
cartridge is
used in it.
DRUM UNIT LIFE
Varies On
Indicates an image drum reached the end
of its life. When temporarily recovered
by cover opening and closing during an
image drum life error, the printer develops
this status (warning).
Replace the
image drum for
the displayed
color.
BELT REFLEX
ERROR
Varies On A belt reflection rate check error.
The printer has the error in no user
environments because, when it is in the
Shipping mode and the PU firmware
detects this status, the PU firmware
provides no notice to the CU firmware.
−
DENSITY SHUTTER
ERROR2
Varies Varies A density adjustment shutter error 2.
The printer has the error in no user
environments because, when it is in the
Shipping mode and the PU firmware
detects this status, the PU firmware
provides no notice to the CU firmware.
−
To Next Page
Loading...
Need help?
General
