44951501TH Rev.2
3-17
Oki Data CONFIDENTIAL
3. INSTALLATION
(3) Installation of an SD card (C531dn only)
Note!
• Fonts cannot be downloaded to any SD cards
for C531dn.
• Even in the power-off status, when the AC cord
is connected, a part of the circuit is operated,
therefore, make sure to unplug the cable.
SD cards are provided as an option for C531dn.
• SD memory card (model name: SDC-A1)
It is a storage added to C531dn printers. It is used for authenticated printing, print
job saving and buffer printing, or used when [Collating Error] appears in making
collated sets of copies.
1. Turn off the printer and disconnect the power cord.
Turn off the printer by following the steps described under “Turning off the power” in
section 3.5.2.
Note! • Turning off the power without taking proper shutdown steps may cause a
failure of the printer, so be sure to execute the shutdown menu.
• Installation of an SD card with the power on may cause a failure of the
printer.
2. Remove the connector cover.
Lock
4. Touch the metal part of the printer to discharge static.
3. Remove the printer cable.
5. Loosen the screw and remove the bracket.
Printer cable
Metal part
Bracket
Screw
To Next Page
Loading...
Need help?
General
