Oki C911 - Page 73

Replacing consumables and maintenance unit
- 73 -
IndexTroubleshooting
1
2
Maintenance

[Replacing the transfer roller unit]
14
Lift opener ( ) of the exit unit, and pull
out the exit unit.
15
Pull up both tips of the transfer roller
unit's lock lever (blue).
CAUTION
Possible to get burned.
Do not touch the fuser unit because it is hot.
16
Hold the transfer roller unit's label part
(blue) and remove it.
17
Remove transfer roller unit.
18
Set the new transfer roller unit to the
exit unit.
Note
z
Do not touch the sponge of the transfer roller unit.