Replacing consumables and maintenance unit
- 76 -
IndexTroubleshooting
1
2
Maintenance
6
Hold the new fuser unit handle with
both hands, and set it to the exit unit.
7
Push down the fuser unit's lock lever
(blue).
8
Put the exit unit back into the printer.
9
Please support recycling of the used
fuser units.
Memo
z
When disposing of the used fuser unit in
unavoidable circumstances, put it in a plastic bag,
and ensure to dispose according to the instructions
provided by the local municipality.
To Next Page
Loading...
Need help?
General
