Oki C911 - Page 97

Device Maintenance
- 97 -
IndexTroubleshooting
1
2
Maintenance
5
Remove the fuser unit by holding its
handle with your hands.
6
Raise the lock levers (blue) at both
ends of the transfer roller unit.
7
Remove the transfer roller unit by
holding its label part (blue).
8
Wipe the dirt off the paper transfer path
with a soft tissue paper.
9
Wipe the dirt off the transfer roller unit
with a soft tissue paper.
Note
z
Be careful not to touch sponge of the transfer roller
unit or damage the transfer roller unit.
10
Set the transfer roller unit to the exit
unit.
Note
z
Do not touch sponge of the transfer roller unit.