Optional accessories > 59
O
PTIONAL
ACCESSORIES
This section describes optional accessory equipment for your
printer. The following accessories are available:
> duplex unit (to enable two-sided printing) (C9650n only)
> additional RAM memory
> hard disk drive (required for verified and spooled printing,
direct printing of PDFs, when collation errors appear,
adding extra fonts) (C9650n and C9650dn only)
> lockable second paper tray (to increase paper input
capacity and keep your paper secure)
> standard second, third paper tray (to increase paper input
capacity)
> high capacity feeder (equivalent to three paper trays)
(C9650n, C9650dn and C9650hdn only)
> Finisher (for stapling printer output)
> Printer cabinet
> Punch unit (to extend Finisher functionality)
NOTE
1. Tray configurations are: Tray 1 only, Tray 1 + 2nd Tray,
Tray 1 + 2nd Tray + 3rd Tray, Tray 1 + HCF, Tray1 +
2nd Tray + HCF
2. The C9650hdtn already has a High Capacity Feeder
installed and so can only accommodate one additional
tray (to give the maximum total of five).
To Next Page
Loading...
