Oki CX2731MFP Setup Guide

11 - English
16 Remove the interior tape (1) and protective
sheet (2), then close the MP Tray.
Turning the Machine On
1 Make sure the power switch (on the right side
of the machine) is off <O>.
2 Plug the power cable into the power socket on
the back of your machine.
3 Plug the power cable into a suitable grounded
outlet.
4 Make sure no documents are on the
document glass or ADF, and that the ADF
cover is closed.
5 Turn the printer on.
Turning The Machine Off
Caution!
Do not turn off the power switch suddenly:
this can damage your machine. Always
follow the correct procedure to ensure that
no data is lost.
1 Press <SETTING> on the control panel.
2 Press the down arrow key repetitively to
select [Shutdown], then press <OK>.
3 When the confirmation message appears,
press the right arrow key to select [Yes], then
press <OK>.

Oki CX2731MFP Specifications

General

Brand	Oki
Model	CX2731MFP
Category	All in One Printer
Language	English