48 - English
USB Connection
1 Prepare a USB cable.
A USB cable is not supplied with your machine.
Use a USB 2.0 Hi-Speed cable for a USB 2.0
Hi-Speed connection.
2 Turn off your machine:
a) Press <SETTING> on the control panel.
b) Press the down arrow key repetitively to
scroll to [Shutdown], then press <OK>.
c) When the confirmation message appears,
press the right arrow key to select [Yes],
then press <OK>.
d) When the screen prompts you to turn off
the power switch, turn the machine off.
3 Turn off the computer.
4 Depress the lock button (1) on the right side
of the machine and remove the access cover
(2).
CAUTION!
Do not plug the USB cable into the network
connection. Doing so may cause a
malfunction.
USB Installation
To Next Page
Loading...
Need help?
General
