17 - English
Print Exits
Important!
Do not open or close the rear exit (face up
stacker) while the machine is printing as it
can cause a paper jam.
Using the Top Exit (Face Down
Stacker)
The top exit (facedown stacker) is the default. It
is enabled when the rear exit is closed.
• Delivers documents with the print side face
down.
• Takes up to 150 sheets of 20-lb. US Bond (75
g/m
2
) paper.
Using the Rear Exit (Face Up
Stacker)
The rear exit is enabled when it is opened.
• Delivers documents with the print side face up.
• Provides straight-through path required for
heavy paper, transparencies, envelopes, and
labels.
• Takes 100 sheets of 20-lb. US Bond (75 g/m
2
)
paper
• Takes 10 envelopes
1 Pull the rear exit on the back of the machine
and open it toward you.
2 Unfold the stacker.
3 Open the paper support.
To Next Page
Loading...
