Oki ES5473 - Enabling the Scan to Fax Server Function

- 243 -
5. Fax
You can change other settings for fax transmissions.
Setting Scanning for Transmission
To enable the Scan to Fax Server function, follow the procedure below in Admin Setup.
If the Scan to Fax Server function is enabled, the fax function is disabled.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [FaxServer Function].
5
Press [Environmental Settings].
6
Press [FaxServer Function].
7
Press [ON].
8
Press [Yes] on a confirmation screen.
The machine automatically restarts.
Enabling the Scan to Fax Server Function