- 36 -
2. Copy
•
When selecting a preset zoom rate
(1) Select a zoom value, and then press [OK].
•
To set other zoom rate
(1) Press [Reduce] or [Enlarge].
(2) Specify a zoom rate.
If [Fit to page(98%)] is selected and the size of the document and the paper are the same, the document is
reduced to fit the paper.
•
When setting the zoom rate by using the numeric keypad
(1) Enter the zoom rate from 25 to 400% by using the numeric keypad or pressing
on the touch panel, and then press [OK].
• You can set the rate in units of 1%.
• If you enter an incorrect value, press the (CLEAR) button, and then enter the correct value.
5
Press the (START) button.
• If [Paper Feed] is set to [Auto], [Zoom] is automatically set to [100%]. To select a different rate, set [Paper Tray],
and then set [Zoom].
• If [Paper Feed] is set to [Auto], the paper tray is automatically selected according to the selected zoom rate. To use
a specific paper tray, reset [Paper Feed] again.
• Even if [Paper Feed] is set to [Auto], you cannot select a paper tray that holds paper other than A4, A5, A6, B5, B6,
Letter, Legal13/13.5/14, Executive, Statement, Folio, or 8.5 SQ paper. In this case, specify from [Paper Feed].
• If [Paper Feed] is set to [Auto], the [Paper Feed] setting automatically changes from [Zoom] to [Auto]. A message
is displayed on the touch panel to inform you that the setting has been changed.
To Next Page
Loading...
