Oki IP-6620 - Printer Rear (Supply Side)

Printer rear (supply side)
31
•
Pressure roller lever
A lever used to fixe or release the media.
Moves together with the pressure roller lever at the
printer front side.
•
Position to install optional exhaust attachment
•
Power inlet
Connect the power cable to
the power inlet.
•
Media support
Temporarily supports the media during
loading and removal procedures.
Can be used also when moved to the
TUR unit side.
•
Media holder
To be installed at both ends of
the roll media.
•
Media jack
Lifts or lowers the media during
loading and removal procedures.
Can be used also when moved to
the TUR unit side.
•
Caster
Set the lock to OFF when moving the printer and set the
lock to ON when locking the printer.
•
USB connector
Used to connect the printer to a
computer.
•
Printer power switch