Network Connection2-4
Setting the Address Manually
You may also manually change the machine’s IP address, subnet mask, and
gateway by using the following instructions. (See chapter 1, “Understanding
the Network Setting Menu,” for more information.)
" When the IP address is changed, add a new port or reinstall the
printer driver.
CAUTION
You should always notify your network’s administrator before changing
the machine’s IP address.
1 Turn on your PC and machine.
2 After the machine’s message window is initialized, set the IP address.
Press this
key...
(until) the message window displays . . .
UTILITY
MACHINE SETTING
ADMIN. MANAGEMENT
Use the keypad to input 6-digits administrator number.
ADMINISTRATOR NO.
NETWORK SETTING
TCP/IP
IP ADDR. SETTING
AUTO
SPECIFY
AUTO
SPECIFY
To Next Page
Loading...
