(5) Select [Internet Protocol Version 4 (TCP/
IPv4)] and click [Properties].
(6) Enter the numbers for the IP address,
subnet mask, default gateway, and DNS
server, and click [OK].
Memo
• If an IP address is to be obtained automatically
from a DHCP server, select [Obtain an IP address
automatically] and do not enter an IP address.
• Do not enter numbers for the default gateway and
DNS server if they are not being used.Close
[Local Area Connection].
(7) Close [Local Area Connection].
3
Configure the IP address and other settings
of the machine.
Memo
• Skip to Step 4 if an IP address and other settings have
already been configured for the machine, or if they are
obtained automatically.
(1) Turn the power to the machine ON, check
that Windows has started, and load the
"Software DVD-ROM" supplied with the
machine.
(2) When [AutoPlay] is displayed, click [Run
Setup.exe].
(3) Select the language and click "Next".
(4) Select the device you want to use and click
"Next".
(5) Read the license agreement and click "I
Agree".
To Next Page
Loading...
Need help?
General
