Copying mixed-size originals in one
operation
You can copy a set of originals whose sizes are individually
different, using the RADF (Reversing Automatic Document
Feeder).
The original sizes that can be mixed are as follows:
North America: LG, LT
Other than North America: A4, B5, FOLIO
1
Place paper in the tray(s).
The multi-purpose tray cannot be used. Use the trays.
2
Adjust the side guides to the widest
original, and then align the originals
against the side guide on the front side.
Note
• When copying originals of different widths, the copied
image of the smaller one may be skewed because it
does not touch the side guide on the rear side.
3
Press [ZOOM] on the touch panel.
4
Press [MIXED SIZE].
5
Press [AMS] to make copies on paper in
one size. To make copies on paper of the
same size as the originals, press [OK] or
[CANCEL] so that the menu returns to the
BASIC menu, and then press [APS].
When [AMS] is selected:
Note
• Before you use Automatic Paper Selection, be sure
that all paper sizes corresponding to the original sizes
have been placed in the tray.
6
Select other copy modes as required, and
then press the [START] button on the
control panel.
To Next Page
Loading...
Need help?
General
