Oki Microline 8480 FB - Hardware and Form Selection

Microline 8480FB User’s Guide
The Function Setting Menu • 37
Hardware Rcv. Buffer 128 , 0 K
Path Change
Not Tear Off , Tear Off
CutSheet Smooth
Valid , Invalid
Skp Ovr Binding Invalid,
Valid 1 , Valid 2
Sheet Feed Mode Not used.
CSF Select Not used.
Host Interface Auto,
Interface , Parallel, USB
I/F Time Out
Appears only if Host
Interface (above) is
set to Interface.
15 sec , 30 sec, 45 sec, 1 min, 2
min, 3 min, 4 min, 5 min
Parallel I/F
Only Nibble Mode
supports bi-
directional
Uni-Directional,
Bi-Directional
Auto Feed XT
Invalid , Valid
I-Prime
Enable , Disable
Buzzer
Enable , Disable
Buzzer Volume
Low , Middle, High
Power Saving
Enable , Disable
Power Save Time 5 min,
10 min , 15 min, 30 min,
60 min
Form Select
Form Select Cross Ref
Line Spacing 6 LPI , 8 LPI
Page Length
279.4 mm (11”) , 304.8 mm
(12”)
Skip Over Perf.
No , Yes
Auto Eject Pos. 3.18 mm (1/8”),
6.35 mm
(1/4”)
Page Width 8”. 10.6”, 13.2”,
13.6”
Check Print Area
Valid , Invalid
ManualFeedCSF Not Used.
ManualSheetCSF Not Used.
Group Item Settings