Microline 8480FB User’s Guide
Explanation of Function Setting Menu Items • 52
SI Pitch (12)
IBM emulation only.
Sets the pitch to be engaged when the printer control panel is set
for 12 cpi and the SI command is received. Choose 12 cpi or 20 cpi
[the default].
Size
The default is Single. Choose Double for double width and height
printing.
Skew Detect
Detects and corrects paper skew when manual feed through the
platform is being used with Auto Align disabled. Available
settings: Valid Level 1, Valid Level 2 [the default], or Invalid.
Change to Valid Level 1 if you wish the detection to be more
precise.
Change to Invalid if you are experiencing difficulty getting forms to
load into the printer when using preprinted forms with anomalies
at the top such as a large dark area on one side or a cutout. Such
types of forms defeat the skew sensor.
Skp Ovr Binding
Choose Invalid, Valid 1 [the default] or Valid 2.
Valid 1
• Continuous forms only
• before Form Feeding
• before Perforation Skip
• line feeding of 18 mm (.71") or more
Valid 2
• Continuous forms and manual feed
• before Form Feeding
To Next Page
Loading...
