Microline 8480FB User’s Guide
Troubleshooting • 70
Caution! The printhead may be very hot after printing. Allow
the printhead to cool before touching it.
1. Turn OFF the power switch.
2. Tear off the continuous form from the paper stack.
3. Turn the platen knob to bring out the continuous forms.
Correcting Repetitive Jams
If paper keeps jamming you probably have bits of paper stuck in the
paper path.
1. If you have continuous forms loaded, park the paper by pressing
SEL to deselect the printer, then pressing LOAD.
2. Turn OFF the printer.
To Next Page
Loading...
