Microline 8480FB User’s Guide
Print Modes • 16
Change Print Mode
Change to Normal
Note If you change the print mode while printing, the printer
immediately switches to the new print mode.
1. Make sure the printer is turned on and that the SEL light is on.
2. Press LF/Normal PRIN.
3. The HIGH SPEED or HIGH IMPACT light goes out.
Change to High Speed
Note If you change the print mode while printing, the printer
immediately switches to the new print mode.
1. Make sure the printer is turned on and that the SEL light is on.
2. Press FF/High Speed Print.
3. The HIGH SPEED light goes on.
Change to High Impact
Note If you change the print mode while printing, the printer
immediately switches to the new print mode.
1. Make sure the printer is turned on and that the SEL light is on.
2. Press MODE/High Impact.
The HIGH IMPACT light goes on.
LF.JPG
FF.JPG
MODE.JPG
To Next Page
Loading...
