Microline 8480FB User’s Guide
Loading Print Media • 22
8. Position the continuous forms stack below the printer with no more than
about 1 inch (3 cm) offset (1).
Switching Between Normal and High
Impact Mode
Normal to High Impact Print Mode
Press MODE / HIGH IMPACT.
The LED beside HIGH IMPACT comes on and
H-IMPCT
appears at the end of the first line of the display.
High Impact to Normal Print Mode
Press LF / NORMAL PRIN.
The LED beside HIGH IMPACT goes out and
NORMAL
appears at the end of the first line of the display.
F5-08a.JPG
MODE.JPG
LF.JPG
To Next Page
Loading...
