Microline 8480FB User’s Guide
Maintenance • 76
Maintenance
Replace the Ribbon
Note The replacement part number for the ribbon cartridge is
41708209. Use only genuine OKI replacement ribbons.
1. Turn off the printer.
2. Open the cover.
3. Tilt the display panel forward.
4. Pull the ribbon out a bit at the left end of the cartridge to give
some slack, then unthread it from the printhead.
5. Remove the used ribbon cartridge and discard it in accordance
with local regulations.
F2_13b.JPG
F2_18a.JPG
To Next Page
Loading...
