Microline 8480FB User’s Guide
Loading Print Media • 19
Continuous Forms (“FRONT”)
Specifications
Width
• Minimum: 4” (102 mm)
• Maximum: 16” (406 mm)
Single Thickness Forms
• Weight range: 14 to 34 lb. US Bond (52 to 128 g/m
2
)
Multi-part Forms
Normal Print Mode (the printer default)
• up to 6-part forms (original + 5)
• Maximum Thickness: 0.0142” (0.36 mm)
High Impact Mode
• up to 8-part forms (original + 7)
• Maximum Thickness: 0.0189” (0.48 mm)
To switch between Normal and High Impact mode, see page 22.
Load Continuous Forms
1. Push the sheet supports in and lift the sheet feed platform.
Sheet_Guide_crop.JPG
F5-03a.JPG
To Next Page
Loading...
