Oki ML5521 - Page 33

MENU MODE > 33
Parallel I/F I-Prime
Pin 18
Auto Feed XT*
Bi-Direction
Note:
*When Epson emulation selected.
Buffer Print, Buffer Clear, Invalid
+5V, Open
Invalid, Valid
Enable, Disable
Serial I/F*
* When Serial
I/F installed.
Parity
Serial Data 7/8 bits
Protocol
Diagnostic Test
Busy Line
Baud Rate
DSR Signal
DTR Signal
Busy Time
None, Odd, Even
8 Bits, 7 Bits
Ready/Busy, X/ON / X/OFF
No, Yes
SSD-, SSD+, DTR, RTS
19200 bps, 9600 bps, 4800 bps,
2400, 1200, 600, 300 bps
Valid, Invalid
Ready On Power Up, Ready On Select
200 ms, 1 sec.
CSF Bin 1** Line Spacing
Bottom Margin
Page Width (Wide model)
Page Length
6 LPI, 8 LPI
Valid, Invalid
8", 13.6"
11", 11-2/3", 12", 14", 17", 5", 3.5",
4", 5.5", 6", 7", 8", 8.5"
CSF Bin 2**
* * When Cut
Sheet Feeder
installed.
Line Spacing
Bottom Margin
V
Page Length
6 LPI, 8 LPI
Valid, Invalid
11", 11-2/3", 12", 14", 17", 5", 3.5",
4", 5.5", 6", 7", 8", 8.5"
Group Item Settings