MENU MODE > 36
Character Set, Default = IBM Set II
Epson and IBM emulations only. Use this to switch character sets to
IBM Set II.
Character Set, Default = Standard
MICROLINE emulation only. Use this to switch the character set to Line
Graphics.
Code Page, Default = USA
Choose the Code Page character set you wish to use:
USA, Canada French, Multilingual, Portugal, Norway, Turkey,
Greek_437, Greek_869, Greek_928, Greek_437 CYPRUS,
Polska Mazovia, Serbo Croatic I, Serbo Croatic II, ECMA-94,
Hungarian CWI, Windows Greek, Windows East Europe,
Windows Cyrillic, East Europe Latin II - 852, Cyrillic I - 855,
Cyrillic II - 866, Kamenicky (MJK), ISO Latin 2, Turkey_857,
Windows Turkey, Ukrainian, Bulgarian, ISO Latin 6 (8859/10),
Windows Baltic, Baltic_774, KBL-Lithuanian, Cyrillic Latvian,
Roman-8, Icelandic-861, Multilingual 858, ISO 8859-15 Greek_737.
CSF Bin Select, Default = Bin 1
Appears only when the optional Dual-Bin Cut Sheet Feeder is
installed. Use this to switch to Bin 2 as the default.
CSF Type, Default = Wide
To avoid paper jams, change this setting to Narrow if you are using the
optional Cut Sheet Feeder on the wide model ML5521 printer.
Diagnostic Test, Default = No
Appears only when the optional Serial Interface is installed. Select
YES to perform a diagnostic test of the serial interface.
DRAFT Mode, Default = HSD
Applies only when the Print Mode is set to DRAFT. Selects the draft
mode to be used: HSD (High Speed Draft) or SSD (Super Speed Draft).
To Next Page
Loading...
Need help?
General
