Olimpia splendid CALDO UP T - H - Programmable Functions Cancellation; I - Window;Door Open Function

CALDO UP T
EN - 17
ENGLISH
c. Repeat the same operations for the other days (from Tuesday to Saturday).
d. When (Sunday) ashes, conrm with button .
e. Set the switching on hour and conrm with button .
f. Set the switching off hour.
Pressing button to conrm will cause the appliance to automatically start in
weekly mode.
 Oncethemodeisset,theappliancewillmemorizeitevenifthetimerisdeac-
tivated.
 Memorywilldeleteiftheapplianceiselectricallydisconnected.
3.4.g.2 - Weekly Timer switching o󰀨
- Press button seven times to turn the weekly timer off.
LEDs meaning
• Once the weekly timer has been activated, ambient temperature is shown on the
display.
The LED °C turns on and the LEDs 24/7 and LOW or HIGH ash (according to
the difference between the set temperature and the ambient one).
• The ap (SWING), minimum power heating (LOW), maximum power heating
(HIGH), temperature setting and window/door open functions can be activated
both in weekly timer mode and in normal functioning.
• The LED turns steady on when the corresponding function is working.
3.4.h - Programmable functions cancellation
3.4.h.1 - Cancel temperature setting
a. During setting phase, press button to cancel.
b. After setting temperature, press button rst, then press to cancel.
c. Press button to exit from the temperature setting mode.
3.4.h.2 - Cancel the weekly Timer setting
a. During setting phase, press button to cancel.
b. After setting the weekly timer, press button rst, then press to cancel.
3.4.i - Window/Door open function
If enabled, the WINDOW/DOOR OPEN function allows the appliance to detect an
abnormal amount of cold air in the room.