Olimpia splendid SILENT 10 P - B - Error Codes; Technical Data

SILENT
ENGLISH
EN - 33
4.2.b - Error codes
During the appliance functioning, a few anomalies which stop its functioning could appear.
In these cases, some error codes appear on the control panel.
•3(ashes+Redledon)Excessiveaccumulationofwaterinsideairconditioner
---------------------------------------------------------------------------------------------------------------------------------
•F1 Filters cleaning.
---------------------------------------------------------------------------------------------------------------------------------
•2(ashes)
•8(ashes)
In these cases:
a. electrically disconnect the appliance
b. wait a few minutes
c. connect the plug to the power socket
d. restart the appliance.
Iftheinconveniencepersistsandtheerrorcodedoesn’tturnoff,electricallydisconnectthe
appliance and refer to an Assistance Centre.
5 - TECHNICAL DATA
For the technical data, please consult the data plate applied to the product (Fig.2).
• Dimensions(WxHxD) 460 x 767 x 395 mm
• Weight(withoutpacking) 29 Kg
• Maximum operating temperature
in cooling mode
(Maximum operating temperature
in heating mode)
DB 35°C - WB 24°C * / DB 43°C - WB 32°C **
DB 27°C - WB 19°C * / DB 27°C - WB 19°C **
• Minimum operating temperature
in cooling mode
(Minimum operating temperature
in heating mode)
16°C * / 16°C **
DB 7°C * / DB 7°C **
* Internal ambient temp.
** Outside ambient temp.