To Next PageTo Next PageWhy are printouts from my Olivetti All in One Printer fuzzy?
If the printouts from your Olivetti All in One Printer are fuzzy, the machine may be used in very humid conditions. Use it in a location that has suitable humidity.
How to fix Olivetti All in One Printer if it cannot feed originals?
If your Olivetti All in One Printer cannot feed originals, ensure that the originals are placed correctly in the document processor. Align the original width guides securely before placing the originals.
Why do vertical streaks appear on prints from Olivetti All in One Printer?
If vertical streaks appear on prints from your Olivetti All in One Printer, the slit glass may be dirty. Clean the slit glass. The inside of the machine may also be dirty; check the toner container and replace it if necessary.
Why are printouts from my Olivetti All in One Printer wrinkled or curled?
If the printouts from your Olivetti All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
What to do if pressing Start key does not produce copies on Olivetti All in One Printer?
If pressing the Start key on your Olivetti All in One Printer does not produce copies, the machine might be in Sleep mode. Press any key on the operation panel to recover the machine from Sleep mode. The machine will be ready to copy within 15 seconds.
What causes paper jams in Olivetti d-COPIA 3514MF All in One Printer?
Paper jams in your Olivetti All in One Printer can occur if the paper is not loaded correctly. Also, paper that is not of the supported type or not in good condition can cause jams; try removing the paper, turning it over, and reloading it. Replace the paper with new paper if it is curled, folded, or wrinkled. Remove any jammed paper.
Why are images skewed on my Olivetti d-COPIA 3514MF?
If the images from your Olivetti All in One Printer are skewed, check if the originals are placed correctly. When placing originals on the platen, align them with the slit glass. When placing originals in the document processor, align the original width guides securely before placing the originals. Also, check the position of the paper width guides to ensure the paper is loaded correctly.
Why are my Olivetti All in One Printer printouts too dark?
If the printouts from your Olivetti All in One Printer are too dark, check if the machine is in Auto Density mode and set the correct density level. If the machine is in Manual Density mode, select the correct density level.
What to do if Olivetti All in One Printer does not recognize USB memory?
If your Olivetti All in One Printer does not recognize the USB memory, check that the USB memory is securely plugged into the machine. Also, check if the USB host is blocked and, if so, select Unblock in the USB host settings.
How to clean Olivetti d-COPIA 3514MF All in One Printer if printouts are dirty?
If the printouts from your Olivetti All in One Printer are dirty, the platen or the document processor may be dirty. Clean the platen or the document processor.
General| Brand | Olivetti |
|---|---|
| Model | d-COPIA 3514MF |
| Category | All in One Printer |
| Language | English |
Identifies and describes the function of each key and display on the operation panel.
Details the physical parts of the machine, including the document processor and internal units.
Explains connection methods (network/USB) and preparing necessary cables.
Details TCP/IP (IPv4) setup for Windows network connection.
Instructions for installing printer drivers and utilities from the DVD on Windows and Macintosh.
Provides instructions for loading paper into cassettes, multi-purpose tray, and feeders.
Guides on placing originals on the platen or in the document processor for scanning.
Procedures for logging in with user credentials and logging out of the machine.
Step-by-step instructions for making standard copies, including paper selection.
Instructions for printing documents from various software applications on a computer.
Details the process of sending scanned images via E-mail, Folder (SMB/FTP), or other methods.
Selects the paper source and size for the copying job.
Selects the file format (PDF, TIFF, XPS, JPEG) for scanned images.
Selects the fineness of scanning resolution for optimal image quality.
Prints documents directly from USB memory without a computer.
Stores scanned image files onto connected USB memory.
Prints documents stored in the machine's job box, including private print jobs.
Monitors the status of print, send, store, and scheduled jobs.
Procedures for canceling print, send, or store jobs in progress.
Configures LAN interface, TCP/IP (IPv4/IPv6), Bonjour, and WSD settings.
Provides a table of common symptoms, check points, and corrective actions for machine problems.
Guides on interpreting and resolving alphanumeric error messages displayed on the control panel.
Instructions for removing jammed paper from the MP tray, cassettes, duplexer, and inside the machine.
Manages user access by enabling login, adding users, and setting authentication methods.
Enables and configures job accounting to track copy/print usage by account.
