To Next PageTo Next PageWhat to do if Olivetti d-COPIA 3514MF ejects blank sheets?
If your Olivetti All in One Printer is ejecting blank sheets, check if the originals are loaded correctly. When placing originals on the platen, place them face-down and align them with the slit glass. When using the document processor, ensure originals are placed face-up.
Why are my Olivetti d-COPIA 3514MF printouts too light?
If the printouts from your Olivetti All in One Printer are too light, verify these possible causes: Ensure that the machine is not in Manual Density mode, and if it is, select the correct density level. Shake the toner container from side to side to distribute the toner evenly. If there is a message indicating the addition of toner, replace the toner container. Replace the paper if it is damp. Disable EcoPrint mode if it is enabled. Also, ensure the paper type setting is correct for the paper being used.
Why my Olivetti d-COPIA 3514MF cannot print?
If your Olivetti All in One Printer is not printing, check the following: Ensure the power cord is plugged into an AC outlet, the printer is powered on, and the printer cable is securely connected. If the machine was powered on before connecting the printer cable, power it on again after connecting the cable. Also, check if the print job is paused; if so, press [Resume]. Finally, if an error message is displayed, follow the corresponding procedure.
General| Brand | Olivetti |
|---|---|
| Model | d-COPIA 3514MF |
| Category | All in One Printer |
| Language | English |
Identifies and describes the function of each key and display on the operation panel.
Details the physical parts of the machine, including the document processor and internal units.
Explains connection methods (network/USB) and preparing necessary cables.
Details TCP/IP (IPv4) setup for Windows network connection.
Instructions for installing printer drivers and utilities from the DVD on Windows and Macintosh.
Provides instructions for loading paper into cassettes, multi-purpose tray, and feeders.
Guides on placing originals on the platen or in the document processor for scanning.
Procedures for logging in with user credentials and logging out of the machine.
Step-by-step instructions for making standard copies, including paper selection.
Instructions for printing documents from various software applications on a computer.
Details the process of sending scanned images via E-mail, Folder (SMB/FTP), or other methods.
Selects the paper source and size for the copying job.
Selects the file format (PDF, TIFF, XPS, JPEG) for scanned images.
Selects the fineness of scanning resolution for optimal image quality.
Prints documents directly from USB memory without a computer.
Stores scanned image files onto connected USB memory.
Prints documents stored in the machine's job box, including private print jobs.
Monitors the status of print, send, store, and scheduled jobs.
Procedures for canceling print, send, or store jobs in progress.
Configures LAN interface, TCP/IP (IPv4/IPv6), Bonjour, and WSD settings.
Provides a table of common symptoms, check points, and corrective actions for machine problems.
Guides on interpreting and resolving alphanumeric error messages displayed on the control panel.
Instructions for removing jammed paper from the MP tray, cassettes, duplexer, and inside the machine.
Manages user access by enabling login, adding users, and setting authentication methods.
Enables and configures job accounting to track copy/print usage by account.
