Olympia BECCO Plus - Charging the Battery; Charging with Charging Adapter

Putting the Mobile Phone into Operation
Charging the BatteryBECCO Plus
15
Charging the Battery
When charging the battery for the first time, it should be charged
for at least 4 hours. Some batteries only reach their full capacity
after several complete charge/discharge cycles. If the battery is
fully discharged, it may take some time for the charging process to
be indicated.
NOTE Before starting to charge the battery, check that it has been in
stalled properly. Do not remove the battery while the mobile phone
is being charged. This could damage the phone.
Charging the battery with the charging adapter
1. Connect the power plug (1) to a properly installed power
socket.
2. Connect the microUSB plug (3) to the USB connection
port (2) on the mobile phone.
NOTE Make sure that the microUSB plug (3) is connected to the
microUSB connection port (2) the right way round.
3
2
1
The charging process is indicated in the display by means of a
charging battery icon.