Olympia BECCO Plus - Picture Dialling Features; Transferring Photos for Dialling; Adding Contacts for Picture Dialling

Mobile Phone Menu
Picture Dialling BECCO Plus
52
Picture Dialling
Assign pictures to your favourite contacts. These pictures are dis
played in the picture menu. On selecting a picture, the phone num
ber of the contact assigned to the picture is dialled.
You can transfer your own pictures from a computer to the mobile
phone or the memory card and set them up for picture dialling.
NOTE To ensure optimal display quality of the pictures, only use photos
with a resolution of 80 x 80 pixels. Otherwise, pictures could be
blurred or not shown at all. Only pictures in ".jpeg" format can be
displayed.
In order to adapt your pictures, use the image converter provided
on our homepage at
www.olympia-vertrieb.de.
Transferring photos from computer
1. Connect the mobile phone to a computer using the USB ca
ble.
2. Select Massstorage.
3. Transfer the pictures required to the mobile phone.
Adding a contact for picture dialling
1. Select Pic..
2. Press and hold the key of a storage location not yet as
signed.
An unused storage location can be recognised by the fact that the
image appears as a grey silhouette.
3. Select Add.
4. Select the required phone book entry and confirm the
prompt. The phone book entry is saved as a picture dialling
contact.
Adding a picture for picture dialling
You can use pictures which you have transferred from your com
puter onto the mobile phone.
1. Select Pic..
2. Press and hold the key to which the required picture selection
contact is assigned.
3. Select Edit and then the third menu option.
4. Select the required picture. The picture is added to the pic
ture dialling contact selected and can be viewed in the Pic.
menu.