Olympia BECCO Plus - Advanced Phone Features; Restore Factory Settings; Emergency Call Function (SOS Key)

Mobile Phone Menu
Restore Factory SettingsBECCO Plus
39
Restore Factory Settings
You should reset the phone settings to their default factory settings
before transferring the device to third parties, e.g. for repair or
sale.
Make a copy of the personal data stored on your SIM card or
microSD memory card prior to initiating a reset to the factory set
tings.
1. Navigate to Menu Settings Restoresettings.
2. Enter the phone lock password.
In its default setting, the phone lock password is 0000.
3. Confirm the prompt. The mobile phone is reset to its factory
settings.
Emergency Call Function (SOS Key)
The acoustic alarm signal is very loud and could cause
hearing damage if held close to the ear. Therefore, keep
the mobile phone away from your head when pressing
the SOS key.
The SOS key activates the emergency call function. Press and
hold the SOS key for approx. 3 sec. to trigger an emergency call.
An acoustic alarm signal is sounded and the emergency text is
sent to the phone numbers stored for the purpose. After that, the
respective phone numbers stored are dialled in succession in
Handsfree mode. You can assign up to 4 phone numbers to the
SOS key.
Switching the emergency call function on/off
Before using the emergency call function, it must be activated.
1. Navigate to Menu Settings EmergencySettings Switch.
2. Select the required setting.
3. Select OK. The setting is saved.
Call chain
Set whether the emergency call numbers should be called once or
repeatedly.
1. Navigate to Menu Settings EmergencySettings SOSChain.
2. Select the required setting.
3. Select OK. The setting is saved.
NOTE If the telephone chain setting is activated, all the phone numbers
stored are dialled in succession a total of 3 times. This ensures
that the emergency call function is not interrupted by answering
machines or mailboxes.