Olympia BECCO Plus - Page 49

Mobile Phone Menu
User ProfilesBECCO Plus
49
Customising a user profile
Adapt your user profile according to your needs.
You can customise all user profiles. However, we recommend en
tering your personalised settings in the user profile Mystyle.
1. Navigate to Menu Userprofiles.
2. Select the user profile required.
3. Select Options Customize.
Alert type
You can define which type of alert signal (Ringonly, Vib.only,
Vib.andring or Vib.thenring) should be issued by the mobile phone
when calls and text messages are received.
1. Navigate to Alerttype.
2. Select the required setting.
Change the settings using the Star or Hash key.
Ringing type
You can also define whether the mobile phone should issue the
acoustic signal selected once (Beeponce), an acoustic signal which
slowly becomes louder (Ascending) or the set tone should be repeat
edly issued (Repeat).
1. Navigate to Ringtype.
2. Select the required setting.
Change the settings using the Star or Hash key.
Ringing tone for incoming call
You can select one of the 20 different ringing tones available.
1. Navigate to Incomingcall.
2. Select the required setting.
You can select a ringing tone and a short time later the selected
tone is played briefly.
Volume for incoming calls
You can set the volume of the ringing tone for incoming calls.
1. Navigate to Ringtonevolume.
2. Select the required setting.
Change the settings using the Star or Hash key.