Chapter 3 Preparation and Inspection
39
ULTRASONIC BRONCHOFIBERVIDEOSCOPE BF-UC180F
4. Align the mark on the videoscope cable with mark 1 on the endoscope
connector and push the cable in until it stops (see Figure 3.15).
Figure 3.15
5. Turn the connector of the videoscope cable clockwise until it stops (see
Figure 3.15).
6. Confirm that the mark on the videoscope cable is aligned with mark 2 on the
endoscope connector.
7. Connect the suction tube from the suction pump to the suction connector on
the suction valve (see Figure 3.16).
Figure 3.16
Mark (yellow)
Mark 1 (yellow)
Mark 2 (yellow)
Suction connector
Suction pump
Suction tube
To Next Page
Loading...
