Olympus BH-2 - Using and Maintaining Phase Contrast; Using Phase Contrast; Periodically Verify Centering; About the Phase Contrast Filter

Last update: 2021/09/23 17:15 oly_bh2_zdrive_installation https://asiimaging.com/docs/oly_bh2_zdrive_installation
https://asiimaging.com/docs/ Printed on 2021/10/12 04:32
Securely Tighten Clamp
Clutch & Drive Securely Tightened
Aligning the drive
After installing & securing the drive and brass clutch plate to the focus shaft of the microscope the
back plate can be positioned and secured. Position the back plate to a point midway along the slots
for the two vertical adjustment screws and secure it in place by tightening the set screw to depress