Olympus bx40 - Page 12

y
n
.
LEE
BX40
ch
SUMMARY
OBSERVATION
PROCEDURE
1. Turn on the main switch and adjust the brightness with the light intensity lever.
(When doing this, keep the light intensity preset button on.) (Page 10)
2. Move all filters out of the light path. (Pages 10)
3. Turn the revolving nosepiece so that the 10X objective is in the light path.
Watch out for an audible click in that position
4. Place a specimen on the stage. (Page 12)
5. Turn the X axis knob a and Y axis knob b to move the specimen into the light
path.
[Using a trinouclar observation tube]
6. Push the observation tube's light path selector knob to "Both-100%" (the IN
position). (Page 15)
7. Looking through the right eyepiece with your right eye, turn the coarse adjustment
knob to bring the specimen into focus. After obtaining approximate focus, use
the fine adjustment knob to make fine adjustments. (Page 18)
lu