143
Useful functions
8
VIDEO OUT
–
Selecting the video signal type
You can select NTSC or PAL according to your TV’s video signal type. Select
the video signal type before connecting the video cable. If you select the
wrong video signal type, you will not be able to play back the recorded
pictures properly on the TV.
1 In the top menu, select MODE
MENU Æ SETUP Æ VIDEO OUT Æ
NTSC or PAL, and press
e.
g“How to use the menus” (P.33)
•Press e again to exit the menu.
• The factory default setting varies
depending on the area where you
purchased this camera.
TIPS
TV video signal types & main regions
Check the video signal type before using the camera.
NTSC Japan, North America, Taiwan, Korea
PAL European countries, China
Mode dial
Arrow pad
OK button
To Next Page
Loading...
Need help?
General
