84
Sequential shooting
5
Advanced shooting
Auto bracketing
Under some conditions, you may obtain better results shooting with exposure
compensation than by using the exposure setting considered optimal by the
camera.
When auto bracketing is set, the exposure is changed automatically for each
frame when you start shooting. The exposure differential and number of
frames can be selected in the menus. The focus and white balance are locked
at the first frame.
Ex: When BKT is set to ±1.0 ×3
1 In the top menu, select MODE
MENU Æ CAMERA Æ DRIVE Æ
BKT, and press d.
g“How to use the menus” (P.33)
2 Select the exposure differential.
Press ac to select ±0.3, ±0.7 or
±1.0, then press d.
-1.0 0.0 +1.0
Mode dial
Arrow pad
OK button
BKt
GO
SELECt
CANCEL
To Next Page
Loading...
