63
Flash
4
Flash intensity control
You can adjust the amount of light emitted by the flash.
In some situations, you may get better results by adjusting the light emission.
Examples include small subjects, distant backgrounds, or situations when
increased contrast is desired. You can adjust the exposure in the range of
±2.0 in 1/3 EV steps.
1 In the top menu, select MODE
MENU Æ CAMERA Æ w, and
press d.
g“How to use the menus” (P.33)
2 Press ac to select a setting,
then press e.
a: Light emission is increased by 1/3EV
each time you press the button.
(EV : Exposure Value)
c: Light emission is decreased by 1/3 EV
each time you press the button.
•Press e again to exit the menu.
• The flash adjustment effect may not be sufficient if the shutter speed
is too fast.
Mode dial
Arrow pad
OK button
CARDSEt PIC
CAMERA
DRIVE
ISO
A/S/M
Note
To Next Page
Loading...
