22
Battery/Card basics
1
Getting started
4 Close the battery/card cover in
direction C then slide it in direction
D.
• Do not press on the card with hard or pointed items such as ballpoint pens.
• Never open the card cover, or remove the card or the battery while
the camera is turned on. Doing so could destroy the data stored on
the card. Once destroyed, data cannot be restored.
• Do not stick labels on the card as the card may get stuck in the
camera.
D
C
The amount of power consumed varies considerably depending on the
operations performed on the digital camera. If you use exhausted battery,
the camera may turn off without displaying the battery level warning (P.15).
Low battery warning
Releasing your finger quickly after pushing the card all the way in may
cause it to eject forcefully out of the slot.
Care when removing the card
Note
To Next Page
Loading...
