14 En
■ DIGITAL TELE MODE
This mode enables you to enlarge the image digitally to magnifications 1.6×,
2×, 3.2× and 4×.
1 Open the lens barrier and press the or button.
2 The magnification changes in the sequence [1.6× → 2.0× → 3.2× →
4.0×] each time the
button is pressed.
The magnification changes in the sequence [3.2× → 2.0× → 1.6× → No
display (1.0)] each time the
button is pressed.
3 Take the picture.
· Press the
button to turn the monitor off and cancel the Digital Tele
mode.
· When the magnification is set to 3.2× or 4×, set the Quality mode to
SQ2.
Note
• Press the button to turn the monitor off and cancel Digital Tele mode.
• The pictures taken in Digital Tele mode may become coarser.
■ SEQUENCE MODE
1 Open the lens barrier and press the button.
2 Select [CAMERA] from the Camera menu screen using the /
buttons, and press the button.
3 Select [DRIVE] using the / buttons, and press the button.
4 Select [ SEQUENCE] using the / buttons and press the
button.
Sequence mode is now set. Press the
button again to exit the menu.
5 Press the Shutter button and keep it pressed.
Picture-taking will continue while the Shutter button is pressed and stop
when the button is released.
To return to normal recording mode, close the lens barrier and then reopen
it.
Basic03C-100satsuei,E.65J 4/24/01, 3:39 PMPage 14 AdobePageMaker6.5J/PPC
Downloaded From camera-usermanual.com
To Next Page
Loading...
Need help?
General
