9En
■ ADJUSTING THE DATE AND TIME
1 Press the button.
The monitor will turn on.
2 Press the button.
The menu will be displayed.
3 Select [SETUP] using the / buttons and
press the
button.
4 Select [ ] using the / buttons and
press the
button.
5 Select the date format [Y-M-D (Year-Month-
Day), M-D-Y (Month-Day-Year) or D-M-Y (Day-
Month-Year)] using the
/ buttons, and
press the
button.
The date adjustment screen will be displayed.
Monitor turns on
Monitor turns off
Camera with
the lens barrier
closed
lights up goes off
WHEN PLAYING BACK PICTURES
Turning the monitor on ... Press the button with the lens barrier
closed.
The camera will turn on in Play mode and the
monitor will turn on.
Turning the monitor off ... Press the
button.
The camera and the monitor will turn off.
Note
The camera’s mode will change to power save mode if you do not carry out any
operation for 3 minutes. To play back pictures, turn the camera on.
Basic02C-100junbi,E.65J 4/24/01, 3:41 PMPage 9 AdobePageMaker6.5J/PPC
Downloaded From camera-usermanual.com
To Next Page
Loading...
Need help?
General
