120
E
PRINTING PICTURES
HOW TO CONNECT TO THE PRINTER
Make sure that the power of the P-300E printer and the
camera are off before connecting.
1 Connect the exclusive (parallel) cable (provided with the
P-300E) to the Parallel port of the printer.
2 Open the connector cover of the camera.
3 Connect the exclusive (parallel) cable to the Printer output
connector of the camera.
4 Turn on the power of the printer and the camera.
● The Selftimer signal blinks while printing, and other
operations are disabled.
● The recording date/time can be printed if PRINT (TIME) is
set. (p. 116)
◆ Because printing is controlled by the camera, the
buttons on the printer are invalid. (Printing will
stop when the power is turned off.)
◆ The LCD monitor display goes off while printing.
◆ When the camera is not operated for 15 seconds,
it cancels the print mode.
Note:
Printer output connector
Prise de sortie imprimante
Drucker-Ausgangsbuchse
Parallel port
Port
parallèle
Parallel-Port
P-300E
To Next Page
Loading...
