70
E
Autofocus mark
Repère d’autofocus
Autofocus-Meßfeld
USING THE FOCUS LOCK
If your main subject is not within the autofocus mark, use the
procedure below to obtain focus. This is called focus lock.
1 Position your subject within the autofocus mark and press
the Shutter release button halfway.
● When the focus is locked, the exposure is also locked (AE
lock).
2 Reposition your subjects in the picture frame while
keeping the Shutter release button depressed halfway.
Then press the Shutter release button fully.
➧ The Green lamp next to the viewfinder lights when the
focus is locked.
<Make sure>
To Next Page
Loading...
