Olympus CAMEDIA C-2040 Zoom - Setting the Image Clarity (Sharpness)

8
Mode setup
177
Setting the image clarity (Sharpness)
Use the procedure below to set the image sharpness. The "NORMAL" setting
gives sharp edges in the image and is useful for showing detail in prints, etc.
The "SOFT" setting gives softer outlines and is best used for images intended
for image processing. The "HARD" setting further enhances the image outlines
to give a bolder image. Select the appropriate setting for your purposes.
Display the MODE SETUP
screen.
● Perform steps 1-3 in "Using
the MODE SETUP menu
screen". (P.170)
Use or on the
Arrow pad to select
"SHARPNESS" and then
press .
Press or to select
"NORMAL", "SOFT" or
"HARD" and then press
the [OK] button.
Press the [OK] button
repeatedly until the menu
disappears.
4
3
2
1
A/S/M
P
• The selected setting is retained until changed, even when the camera is
switched off.
P
O
W
E
R
/
M
O
D
E
D
I
A
L
P
A
/S
/M
O
F
F
32
43
ALL RESET
SHARPNESS
CONTRAST
[
1/4
]
ON
NORMAL
NORMAL
RED
• • •
◆
• • •
BLUE
WB
+
-
(This screen shows the still
photography menu.)
ALL RESET
SHARPNESS
CONTRAST
[
1/4
]
NORMAL
NORMAL
WB
+
-
HARD
NORMAL
SOFT