205
10
Miscellaneous
Troubleshooting
Problem:
Cause Solution See
When the camera is connected to a computer, an error message appears
during data transfer.
qThe cable is not connected cor-
rectly.
wThe camera is switched off.
eThere are no batteries in the cam-
era.
rThe USB driver is not correctly
installed.
qCheck that the cable is connected
correctly.
wSet the Mode dial to " ".
eLoad new batteries or use the
optional AC adapter.
rCheck whether the camera is cor-
rectly recognized by the computer,
as laid out in the USB driver (or
CAMEDIA Master) installation
guide.
P.194
P.196
P.29,33
To Next Page
Loading...
