Playing back pictures on a TV
73
5
Playback
You can select [NTSC] or [PAL] according to your TV’s video signal type. Use this
setting when playing back pictures on a TV in a foreign country. Select the [VIDEO
OUT] signal before connecting the AV cable. If you select the wrong video signal
type, you will not be able to play back the recorded pictures properly on the TV.
Top menu [MODE MENU] [SETUP] [VIDEO OUT]
g“How to use the menus” (P. 16)
• In : Top menu [SETUP] [VIDEO OUT]
1 Select [NTSC] or [PAL], and
press Z.
Selecting the video output
TIPS
• TV video signal types & main regions
Check the video signal type before connecting the camera to the TV.
NTSC North America, Taiwan, Korea
PAL European countries, China
• The factory default setting varies depending on the region where you
purchased the camera.
X
VIDEO OUT
PIC
CAMMEM
SETUP
NTSC
PAL
To Next Page
Loading...
