83
6
Settings
Selecting a power on screen (PW ON
SETUP)
You can set a screen or sound that is played back when the camera is
turned on. You can also register your favorite picture and display it on the
screen. g“Registering a power on screen (SCREEN SETUP)” (P. 84)
Top menu [MODE MENU] [SETUP] [PW ON SETUP]
g“How to use the menus” (P. 16)
• In : Top menu [SETUP] [PW ON SETUP]
1 From [SCREEN], select [OFF], [1]
or [2], and press b.
OFF No picture is displayed.
1 A picture is displayed.
2 The registered picture is displayed.
If there is no registered picture,
nothing is displayed.
2 From [SOUND], select [OFF], [1]
or [2], and press
b
.
OFF No startup sound is output.
1 / 2 Startup sound is output.
• The volume level is the same as that set
for the playback volume.
g“Setting the playback volume
(VOLUME)” (P. 87)
3 Press Z.
PW ON SETUP
SCREEN
SOUND
OFF
1
2
SELECT
GO
OK
OFF
1
2
SELECT
GO
OK
PW ON SETUP
SCREEN
SOUND
To Next Page
Loading...
