46
3
Connecting to Your PC
Connecting to your PC using the USB
cable
1
Release the HOLD switch.
2
Insert end A of the USB cable to
your PC's USB port or USB hub.
3
Confirm that the recorder is not in
use before attaching end b of the
USB cable to the terminal port of
the recorder.
“REMOTE” is displayed on recorder if the
USB cable is connected.
REMOTE
Windows
Macintosh
When the recorder is connected
and “My Computer” is opened, a
removable disk drive is displayed.
If “Add New Hardware Wizard”
appears, cancel the wizard by
pressing the [Cancel] button and
then install DSS Player.
If the recorder is connected to Mac OS, an icon with a drive
name of “unlabeled” appears.
Be sure to finish installing DSS Player before connecting the recorder.
Connecting to Your PC
To Next Page
Loading...
