Olympus DP73 - Connecting the Interface Cable

26
3
Connecting the Interface Cable
• The cords and cables are vulnerable to bend or twist. Do not
apply excessive force to them.
• Be sure to switch off the PC before proceeding to the connec-
tions.
•
Alw
ays use the cables designated by Olympus.
•
When
connecting the cable, insert the connector plug in the
proper direction.
•
K
eep the cables well away from the equipments generating
high heats, such as the lamp housing of microscope.
CAUTION
Cable side
Camera head/
PC/
PCIe Extension Box side
Insert the connector of the interface cable all the way into the connector
a
of the camera head and secure the clamping screws on both sides
of the connector, and check that the interface cable will not slip out.
Insert the connector of the interface cable all the way into the connector
b
of the desktop PC and secure the clamping screws on both sides
of the connector, and check that the interface cable will not slip out.
1
2
1
a
2
b