Olympus DP80 - Installing the PCIe Interface Board

DP80
21
3-2 Installing the PCIe Interface Board to Desktop PC
1
Installing the L
ow-Profile Bracket
If the desktop PC’s extension slot is the low-profile specifications, it is
required to replace the existing bracket with a low-profile bracket.
Prepare a flat-blade and a Phillips screwdriver and remove the “ – ”
screws
a
and the “ + ” screw
b
.
Replace the existing bracket with the low-profile bracket
c
and attach
the screws
a
b
.
Do not provide excessive force when tightening the screws of
the PCIe interface board, since they may be damaged if tightened
excessively.
1
2
CAUTION
a
b
c
Please read this section when connecting DP80 to desktop PC.
1
1
1
2